产品描述:
特点:
1、五连杆式机构,双包络蝸杆传动,增加手臂行进速度及运转平稳性,并能增加产量;
2、箱體一體成形,大大提高机器精准度;
3、给汤机手臂前进/后退及注汤/取汤,由独立变频器控制,提高给汤速度,操作容易;
4、采用连杆式手臂,即使调整运动也能平稳刹车,铝汤不易溢出;
5、采用PLC控制,由简易型触控板面设定各项功能,操作容易并具有故障码显示功能,易于检修.
规格/机型 | LW1-15M | LW1-20M | LW1-35M | LW1-40M | LW1-65M | LW1-80M | LW1-100M | LW1-125M | LW1-145M | LW1-165M | |
适用压铸机 | 125-200T | 400T | 500-650T | 700-1000T | 1100-1250T | 1600T | 2000-2200T | 2500T | 2800-3000T | 3400T以上 | |
给汤量 | 0.3~2kg | 1.0~3.5kg | 2.5~4.5kg | 3.5~8.0kg | 6.0~15kg | 8.0~20kg | 12~30kg | 15~35kg | 18~40kg | 20~50kg | |
给汤精度 | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% | |
给汤速度 | Max.12sec | Max.15sec | Max.18sec | Max.18sec | Max.22sec | Max.28sec | Max.35sec | Max.38sec | Max.45sec | Max.50sec | |
坩埚内径 | Min.450mm | Min.480mm | Min.550mm | Min.550mm | Min.600mm | Min.700mm | Min.800mm | Min.950mm | Min.1100mm | Min.1200mm | |
取汤深度 | Min.350mm | Min.350mm | Min.350mm | Min.450mm | Min.480mm | Min.480mm | Min.510mm | Min.530mm | Min.550mm | Min.600mm | |
驱动 电源 | 手臂 | 400W4P | 750W4P | 1500W4P | 1500W4P | 2200W4P | 2200W4P | 2200W4P | 2200W4P | ||
汤勺 | 200W6P | 400W6P | 400W4P | 750W4P | 750W4P | 750W4P | 750W4P | 1500W4P | |||
电源 | 单相220V50-60Hz | ||||||||||
操作电源 | DC24V | ||||||||||
电源容量 | 1.5KVA | ||||||||||
机器重量 | 260KG | 280KG | 385KG | 400KG | 750KG | 800KG | 1200KG | 1320KG | 1450KG | 1800KG | |
